Netgear WGR614v7 WGR614v7 Setup Manual - Page 6
The Front of the Router, Table 1-1., Status Light - setup
View all Netgear WGR614v7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Router Setup Manual The Front of the Router 5 2 4 1 3 Figure 1-1 You can use the status lights on the front of the router to verify various conditions. Table 1-1. Status Light Activity Description 1. Power 2. Test 3. Wireless On Off On Off On On -- Amber 4. Internet On -- Green Blink -- Green On (Green) 5. LAN (Local Area Blink (Green) Network) Lights On (Amber) 1-4 Blink (Amber) Off Power is supplied to the router. Power is not supplied to the router. The system is initializing or in the middle of a firmware upgrade. The system is ready and running. Indicates that the Wireless port is initialized. The Ethernet cable is connected but the router has not gotten an Internet address. The router has an Internet address. Data is being communicated with the Internet. The local port is connected to a 100 Mbps device. Data is being transmitted at 100 Mbps. The local port has detected a link with a 10 Mbps device. Data is being transmitted at 10 Mbps. No link is detected on this port. 1-2 Connecting the Router to the Internet v1.0, 2006-03-17