Netgear WNAP320 WNAP320 Reference Guide (PDF) - Page 68
Monitor Wireless Stations, Refresh
UPC - 606449075526
View all Netgear WNAP320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ProSafe Wireless-N Access Point WNAP320 Reference Manual Monitor Wireless Stations The Wireless Stations screen contains the Available Wireless Stations table. This table shows all IP devices that are associated with the wireless access point in the wireless network that is defined by the wireless network name (SSID). The table heading indicates the wireless mode (802.11b, 802.11bg, or 802.11ng). Note: A wireless network can include multiple wireless access points, all using the same network name (SSID). This extends the reach of the wireless network and allows users to roam from one wireless access point to another, providing seamless network connectivity. Under these circumstances, be aware that the Available Wireless Stations table includes only the stations associated with this wireless access point. To view the attached wireless stations, and to view details for a wireless station: 1. Select Monitoring > Wireless Stations. The Wireless Stations screen displays: Figure 41. To update the list, click Refresh. If the wireless access point is rebooted, the wireless station data is lost until the wireless access point rediscovers the devices. To force the wireless access point to look for associated devices, click Refresh. For each device, the Available Wireless Stations table shows the MAC address, BSSID, SSID, channel, rate, state, type, AID, mode, and status. For information about these and more fields, see the following table. 68 | Chapter 4. Management