Netgear WNDAP360-100NAS WNDAP360 Reference Manual - Page 95
Enable Wireless Bridging, Wireless Point-to-Multi-Point Bridge, Table 27.
View all Netgear WNDAP360-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
ProSafe Dual Band Wireless-N Access Point WNDAP360 b. Select the Enable Wireless Bridging check box. The Local MAC Address field is a nonconfigurable field that shows the MAC address of the wireless access point. c. Select the Wireless Point-to-Multi-Point Bridge radio button. The screen adjusts. d. The profile table shows four security profiles. Choose a security profile to edit by selecting the corresponding radio button to the left of the profile. e. Click Edit to configure the selected security profile settings. The Edit Security Profile screen displays for the selected security profile. (The following figure contains some examples.) Figure 58. f. Specify the settings as explained in the following table: Table 27. Point-to-Multipoint Bridge Profile and Authentication Settings Field Description Profile Definition Profile Name Enter a profile name that is easy to remember. The default names for the four security profiles are NETGEAR-WDS-1, NETGEAR-WDS-2, NETGEAR-WDS-3, and NETGEAR-WDS-4. Remote MAC Address Enter the MAC address of the remote wireless access point (the MAC address of AP2 or AP 3 on LAN Segment 1 in Figure 56 on page 94). Advanced Configuration 95