Netgear WNHDE111-100NAS WNHDE111 User Manual - Page 61
Wireless, Table 7-1., Device Info Status Fields continued
View all Netgear WNHDE111-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual Table 7-1. Device Info Status Fields (continued) Field Wireless LAN Wireless Radio WISH MAC Address Network Name (SSID) Channel Security Mode Wi-Fi Protected Setup LAN Computers Description Indicates whether the radio feature of the router is enabled. If not enabled, the Wireless LED on the front panel is off. Identifies if WISH is active or not. This is the unique physical address being used by the Ethernet ports of the wireless interface. The wireless network name (SSID) being used by the wireless port of the router. The default is NETGEAR-HD. Identifies the channel of the wireless port being used. Click the link to the online document "Wireless Networking Basics" in Appendix B for the frequencies used on each channel. In Up to 300 Mbps mode, there are two channels: a primary channel (P) and a secondary channel (S). Indicates the wireless security mode: • None • WEP • WPA/WPA2 (the default) Indicates whether the radio feature of the router is enabled. If not enabled, the Wireless LED on the front panel is off. The names and address of devices in the network. • Click Wireless to display wireless client address, mode, rate and signal strength status. Figure 7-2 Table 7-3 describes the traffic statistics. Using Network Management Tools 7-3 v1.1, May 2008