Netgear WNR854T WNR854T Setup Manual - Page 11

Wireless Router Setup Manual b. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute. c. Last, turn on your computer. Note: For DSL customers, if software logs you in to the Internet, do not run that software. You may need to go to the Internet Explorer Tools menu, Internet Options, Connections tab page where you can select "Never dial a connection." 1 2 3 4 Figure 1-7 d. Check the wireless router status lights to verify the following: • Power: The power light (1) should turn amber and then solid green. If it does not, see "Quick Tips" on page 2-1. • Wireless: The wireless light (2) should be lit after turning on the router. • Internet: The Internet port light (3) should be lit. If not, make sure the Ethernet cable is securely attached to the wireless router Internet port and the modem, and the modem is powered on. • LAN: A LAN light (4) should be lit. Green indicates your computer is communicating at 1000 Mbps; amber indicates 10/100 Mbps. If a LAN light is not lit, check that the Ethernet cable from the computer to the router is securely attached at both ends, and that the computer is turned on. Connecting the Router to the Internet 1-7 v1.0, 2006-04