Netgear XAVB5602 User Manual - Page 24
Turn LEDs Off or On, Set the Powerline Encryption Key, Turn LED off, To set the encryption key
![]() |
View all Netgear XAVB5602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Powerline PassThru Adapter Turn LEDs Off or On You can turn off or turn on the LEDs of any device on your Powerline network. To turn the LEDs off or on: 1. On the Powerline map, right-click the icon of the device. 2. On the pop-up menu that displays, select either Turn LED off or Turn LED on. A pop-up screen displays advising you that connectivity will be temporarily lost while the LEDs are being reset. 3. Click the OK button. A message displays indicating that the operation was successful. 4. Click the OK button. Set the Powerline Encryption Key Powerline devices on the same Powerline network use the same encryption key. The factory default encryption key is HomePlugAV. In locations such as apartment buildings or office buildings, other people might use the same electrical power lines that you use for your Powerline network. To protect your Powerline network from unwanted access, you can use NETGEAR genie to set a private encryption key for your Powerline devices. Make sure that all of your Powerline devices use the same encryption key so that they can communicate with each other. If you forget your private encryption key, you can reset the encryption key to the factory default key, HomePlugAV. See Reset a Device to Factory Default Settings on page 26. To set the encryption key: 1. On the Powerline map, right-click the icon of a Powerline device in your network. Using NETGEAR genie 24
![](/manual_guide/products/netgear-xavb5602-user-manual-f2e8e95/24.png)