Netgear XAVB5602 User Manual - Page 26
Reset a Device to Factory Default Settings, Apply Security to Selected Devices, Factory Reset
View all Netgear XAVB5602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Powerline PassThru Adapter Note: If your computer is not connected locally (with an Ethernet cable) to the device that you want to configure, you must enter the device password. The device password is printed on the product label. 5. Click the Apply Security to Selected Devices button. When the encryption key is set, a message displays indicating that the operation was successful. 6. Click the OK button. Reset a Device to Factory Default Settings You can reset the encryption key of a Powerline device to the factory default key, HomePlugAV. Note: If your Powerline network uses a private encryption key, resetting a Powerline device to its factory default settings disconnects the device from the network. To avoid disconnecting your computer from the network, reset all other Powerline devices on the network before you reset the device that is connected to your computer. To reset a device to its factory default settings: 1. On the Powerline map, right-click the icon of the device that you want to reset. 2. On the pop-up menu that displays, select Factory Reset. A pop-up screen displays advising you that connectivity will be temporarily lost while the device is being reset. 3. Click the OK button. A message displays asking you to confirm the reset. 4. Click the OK button. A message indicates whether the operation succeeded. Using NETGEAR genie 26