Nikon 25414 D2Xs User's Manual - Page 211

Menu Guide-Custom Settings Custom Setting d1: CL-Mode Shooting Speed This option determines the rate at which photographs can be taken in CL (continuous low-speed) mode (during interval timer photography, this setting also determines the frame advance rate for single-frame and mirror-up modes). Shooting speed can be set to values between 1 and 7 frames per second (fps); the default value is 3 fps. Regardless of the setting chosen, the maximum speed when Hi-speed Crop is Off is 4 fps ( 41). The frame advance rate may drop at slow shutter speeds. Highlight d1 Shooting speed in the second level of the CSM menu ( 181) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Custom Setting d2: Max No. of Shots Taken in Continuous Shooting The maximum number of shots that can be taken in a single burst in continuous mode can be set to any value between 1 and 60. Highlight d2 Maximum shots in the second level of the CSM menu ( 181) and press the multi selector to the right. Press the multi selector up or down to choose the number of shots, then press to the right to make a selection. The Memory Buffer ( 44) The following table shows the maximum number of shots that can be taken before the memory buffer fills and shooting slows: Quality Uncompressed NEF (RAW)+JPEG Compressed NEF (RAW)+JPEG Uncompressed NEF (RAW) Compressed NEF (RAW) TIFF RGB JPEG Hi-speed crop: Off 16 17 16 22 Hi-speed crop: On 28 29 28 38 The above figures assume that ISO sensitivity is set to ISO 100, long exposure noise reduction is off ( 175), and that Size priority is selected for JPEG compression ( 47). 197