Nikon 25414 D2Xs User's Manual - Page 226

Menu Guide-Custom Settings Custom Setting f7: Setting Method for Buttons and Dials This option allows adjustments that are normally made by holding a button and rotating a command dial to be made by rotating the command dial after the button is released. Highlight f7 Buttons and dials in the second level of the CSM menu ( 181) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Option Description Default Changes to settings made by rotating command dial while button is held (default) down. Hold Settings can be changed by rotating command dial after button is released. To exit, press button again, press shutter-release button halfway, press , , , , ISO, QUAL, or WB button, or (except when No limit is selected for Custom Setting c3 or optional adapter is used) wait for about 20 s. Custom Setting f8: Disable Shutter If No CF Card This option can be used to enable the shutter release when no memory card is inserted in the camera. Note that when photographs are being captured to a computer using Camera Control Pro (available separately), photographs are not recorded to the camera memory card and the shutter release will be enabled regardless of the setting chosen for this option. Highlight f8 No CF card? in the second level of the CSM menu ( 181) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Option Description On (default) Shutter-release button disabled when no memory card is inserted. Off Shutter-release button enabled even when no memory card is inserted. 212