Nikon 25432 User Manual - Page 394

Remote terminal accessories The D300 is equipped with a tenpin remote terminal for remote control and automatic photography. The terminal is provided with a cap, which protects the contacts when the terminal is not in use. The following accessories can be used (all lengths are approximate): Accessory Description Length Remote Cord MC-22 Remote shutter release with blue, yellow, and black terminals for connection to a remote shutter-triggering device, allowing control via sound or electronic signals. 1m (3 ft. 3 in.) Remote Cord MC-30 Remote shutter release; can be used to reduce camera shake or keep the shutter open during a time exposure. 80 cm (2 ft. 7 in.) Remote Cord MC-36 Remote shutter release; can be used for interval timer photography or to reduce camera shake or keep the shutter open during a time exposure. Equipped with back-lit control panel, shutter-release lock for use in bulb photography, and timer that beeps at one-second intervals. 85 cm (2 ft. 9 in.) Extension Cord MC-21 Can be connected to ML-3 or MC-series 20, 22, 23, 25, 30, or 36. Only one MC-21 can be used at a time. 3m (9 ft. 10 in.) Connecting Cord Connects two cameras for simultaneous MC-23 operation. 40 cm (1 ft. 4 in.) Adapter Cord MC-25 Ten-pin to two-pin adapter cord for connection to devices with two-pin terminals, including the MW-2 radio control set, MT-2 intervalometer, and ML-2 modulite control set. 20 cm (8 in.) n GPS Adapter Cord MC-35 Connects GPS devices to D300 via PC cable supplied by manufacturer of GPS device (pg. 201). 35 cm (14 in.) Modulite Remote Allows infrared remote control at ranges of Control Set ML-3 up to 8 m (26 in.). - 368