Nikon 25546 User Manual - Page 99

Format memory, Format

Page 99 highlights

Problem Cause/Solution PictureProject does not start when • Camera is off. 13 camera is connected • Batteries are exhausted. 13 • USB cable is not correctly connected. 42 • Appropriate USB option is not 44 selected. - • Camera is not registered in Device Manager (Windows only). See the PictureProject reference man- ual (on CD) for further information. Pictures not displayed on television Choose correct video mode. 41 Format memory > Format option not available Batteries are low. 13, 63 Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Technical Notes 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

87
Technical Notes
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a strong
external static charge. Turn the camera off, remove and replace the batteries, and then
turn the camera on again. In the event of continued malfunction, contact your retailer
or Nikon representative. Note that disconnecting the power source as described above
may result in the loss of any data not recorded to internal memory or the memory card
at the time the problem occurred. Data already recorded will not be affected.
PictureProject does not start when
camera is connected
Camera is off.
Batteries are exhausted.
USB cable is not correctly connected.
Appropriate
USB
option is not
selected.
Camera is not registered in Device
Manager (Windows only).
See the PictureProject reference man-
ual (on CD) for further information.
13
13
42
44
Pictures not displayed on television
Choose correct video mode.
41
Format memory
>
Format
option not available
Batteries are low.
13, 63
Problem
Cause/Solution