Nikon 25551 User Manual - Page 23
Power Saving Function in Shooting Mode, Additional Precautions Regarding Batteries
UPC - 018208255511
View all Nikon 25551 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparation for Shooting Inserting Batteries j Replacing Batteries Turn the camera off and make sure that the power-on lamp and the monitor have gone out before removing or inserting batteries. j Additional Precautions Regarding Batteries • Read and follow the warnings and cautions on pages iii-iv and 109 of this manual. • Do not combine old and new batteries or batteries of different makes or types. • Batteries with the following defects cannot be used: Batteries with peeling Batteries with insulation that Batteries with a flat does not cover the area negative terminal around the negative terminal. j Battery Type To improve battery performance, select the type of battery currently inserted in the camera in the setup menu. The default setting is [Lithium]. When any other type of battery is used, turn the camera on and change the setting (c 105). k Alkaline Batteries Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a reliable brand. k Alternative Power Resources To power the camera continuously for extended periods, use an EH-65A AC adapter kit (c 106). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. k Power Saving Function in Shooting Mode The camera adjusts monitor brightness according to the brightness of the surroundings to save power. When no operations are performed for fifteen seconds, the monitor turns off and the power-on lamp blinks. If no operations are performed for another fifteen seconds, the camera enters standby mode. To reactivate the camera, press the shutter-release button halfway. If no operations are performed in standby mode for another three minutes, the camera turns off. The amount of time allowed to pass before the camera enters standby mode can be specified from the auto off menu (c 100). 11