Nikon 26114 P80 User's Manual - Page 69

Taking a Closer Look: Playback Zoom Rotating the zoom control to g (i) during full-frame playback mode (A 28) zooms the current picture in 3×, with the center of the picture displayed in the monitor. The guide at lower right shows which portion of the picture is enlarged. The following operations can be performed while 3.0 pictures are zoomed in. To Zoom in Zoom out Use g (i) f (h) Description A Zoom increases each time the zoom control is rotated to g (i), up to about 10×. Zoom also increases by rotating the command - dial to right. Zoom decreases each time the zoom control is rotated to f (h). When the magnification ratio reaches 1×, the display returns to full-frame playback mode. - Zoom also decreases by rotating the command dial to left. View other areas of picture Press the multi selector H, I, J or K to move to areas of the picture not visible in the monitor. 10 More on Playback Switch to fullframe playback Crop picture Switch to shooting mode k d c Press k. 28 Press d to crop current picture to contain only the portion visible in the monitor. 58 Press c or the shutter-release button to switch to the mode selected with the mode dial. 28 Pictures Taken in Face Priority When the zoom control is rotated to g (i) during full- frame playback mode for pictures taken in Face priority (A 103), the picture will be enlarged using the face (which was focused on during shooting time) as the centralized point. If several faces are recognized, the picture will be 2.0 enlarged using the face (which was focused on during shooting time) as the centralized point, and pressing the multi selector H, I, J, or K will enable you to switch between the people's faces. You can change the zoom ratio by rotating the zoom control to g (i) or f (h). 55