Nikon COOLPIX W100 Quick Start Guide - English for customers in India - Page 13

5 Check the authentication code. • After checking that the camera and smart device display the same six-digit authentication Auth. code 000000 Confirm that the same authentication code is displayed on the smart device and press OK. code, and then follow the steps below (note that the Camera code may not be displayed in some versions of iOS, but you should follow the steps below even if the code is not displayed). - On the camera, press O. - On the smart device, tap Pairing (the name of the button may be different depending on the smart device). 6 Press A when the dialog at right is displayed. • If the camera displays Could not connect., press R Reconnect to return to step 4. To cancel pairing settings, press SCancel. Your camera and smart device are connected! SnapBridge will send your photos to your smart device as they are taken. Get Ready 13