Nikon D5200 Reference Manual - Page 227

• Wireless Remote Control ML-L3 (0 31): The ML-L3 uses a 3 V CR2025 battery. Remote controls/ wireless remote controller Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap and open the battery chamber (w). Ensure that the battery is inserted in the correct orientation (r). • Wireless Remote Controller WR-R10 */WR-T10: When a WR-R10 wireless remote controller is attached, the camera can be controlled wirelessly using a WR-T10 wireless remote controller (0 32, 175). Insert a fingernail into the gap behind the battery-chamber latch and open the battery chamber (q). Ensure that the battery is inserted in the correct orientation (e). Microphones Stereo Microphone ME-1 (0 104) * Accessory terminal accessories The D5200 is equipped with an accessory terminal for WR-R10 wireless remote controllers (0 175), MC-DC2 remote cords (0 60), and GP-1 GPS units (0 175), which connect with the 4 mark on the connector aligned with the 2 next to the accessory terminal (close the connector cover when the terminal is not in use). USB and A/V • UC-E17 and UC-E6 USB cables (0 134) connector • Wireless Mobile Adapter WU-1a *: Supports two-way communication between the accessories camera and smart devices running the Wireless Mobile Adapter Utility. * The WR-R10 wireless remote controller can not be attached at the same time as a WU-1a wireless mobile adapter or ME-1 stereo microphone. Attempting to forcibly attach accessories can damage the camera or accessory. 210