Nikon D800E User Manual - Page 136

3 Adjust settings. The maximum value for auto ISO sensitivity can be selected using Maximum sensitivity (the minimum value for auto ISO sensitivity is automatically set to ISO 100; note that if the value selected for Maximum sensitivity is lower than the value currently selected for ISO sensitivity, the value selected for Maximum sensitivity will be used). In exposure modes e and g, sensitivity will only be adjusted if underexposure would result at the shutter speed selected for Minimum shutter speed (1/4000-1 s, or Auto; in modes f and h, ISO sensitivity will be adjusted for optimal exposure at the shutter speed selected by the user). If Auto (available only with CPU lenses; equivalent to 1/30 s when a non-CPU lens is used) is selected, the camera will choose the minimum shutter speed based on the focal length of the lens (auto shutter-speed selection can be fine-tuned by highlighting Auto and pressing 2; for example, faster values can be used with telephoto lenses to S reduce blur). Shutter speeds slower than the minimum value may be used if optimum exposure can not be achieved at the ISO sensitivity value selected for Maximum sensitivity. Press J to exit when settings are complete. When On is selected, the viewfinder and control panel show ISO-AUTO. When sensitivity is altered from the value selected by the user, these indicators blink and the altered value is shown in the viewfinder. 112