Nikon ML3 User Guide - Page 12

0 • ) Point the transmitter in the direction of the 2 • reception sensor and lightly press the transmission button. The monitor light will light up for a moment. The reception indicator LED lights up for a moment and the camera's exposure meter turns on. If the camera's focus mode is set to C, focus detection starts immediately. Fully depress the transmission button. It takes 3 . approx. 3 seconds to take a picture. The reception indicator LED starts blinking rapidly and continues blinking until a picture is taken. • To cancel operation during a delayed- shooting interval, set the receiver's power/channel selector switch to OFF. Pre-shooting focus detection: A focus detection signal is not sent during the delayedshooting interval. Be sure to lightly press the transmission button to secure focus before actual shooting. 24 Auto triggering In this mode, the shutter is released when the subject enters the area directly between the transmitter and the receiver, without the transmission button being pressed. This mode is useful when you want to take a picture, for example, of a wild animal that is sensitive to human presence. Test mode Before Auto Triggering operation, shooting in the Test mode, which verifies transmitter-to-receiver communication, is recommended. 2ik TRIG 1 Set the transmitter's channel . selector to A. TRIG. • In the Test mode, always mount the receiver on the camera or a tripod. 25