Nikon ML3 User Guide - Page 6
Battery, check
View all Nikon ML3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• it O Insert the bracket between . the tripod head and the camera. Then, screw the tripod's lock nut firmly to secure the assembly. 2 Insert the receiver into the . bracket and tighten the lock screw. • Make sure the receiver and/or bracket is not visible in the viewfinder. 3 Insert the camera plug with . the A symbol on the plug pointing upwards into the remote terminal of the camera. Then screw the threaded ring into the terminal. • Make sure the remote cord does not obstruct the camera lens or the receiver's reception sensor. Battery check Nikon M.3 RECENER O it 0 1 Set the power/channel selector switch to CH1 or CH2 according . to the channel selector setting on the transmitter. (Receiver operates with either CH1 or CH2 setting when the channel selector setting on the transmitter is at A. TRIG.) If the reception indicator LED lights up for a moment, the camera's batteries have sufficient power. If it does not come on, check camera's battery installation or replace camera's batteries with a fresh set.