Nikon ML3 User Guide - Page 9
Operation
View all Nikon ML3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Camera settings Be sure to adjust the camera settings before operation. Recommended camera settings are: Focus modes: C or M Film advance modes: C-1L or lat, Exposure modes: Programmed auto (PIPs), Aperture-Priority Auto or ShutterPriority Auto (see camera's instruction manual) exposure mode. OPERATION The ML-3 offers a choice of shooting modes: • S: Single release mode • C: Continuous release mode • DELAY/TEST: Delay mode • DELAY/TEST (in A.TRIG operation): Test mode Note: When exposure is set to auto mode, use the eyepiece shutter to prevent incorrect exposure caused by light leaking through the finder. 18 Single frame shooting (S) ) C141412r . TRIG 0 ti 1 Set shooting mode selector . on the transmitter to S. • If the camera's focus mode is set to S, the camera may not focus correctly when the transmission button is pressed lightly. Be sure to set the camera's focus mode to C. • Depending on the shooting situation, set the camera's focus mode to M. In this case, be sure to adjust focus manually before shooting. ( 2 Point the transmitter in the direction of the reception sensor and . lightly press the transmission button. The monitor light on the transmitter will light up for a moment. Then, the reception indicator LED also lights up for a moment and the camera's exposure meter turns on. In the autofocus mode, focus detection starts immediately. If a connected Speedlight is set at STBY (standby), it also turns on. 19