Nikon N80QD Instruction Manual - Page 71
Reset to DX film speed setting for new film
UPC - 018208802173
View all Nikon N80QD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
• Menu number and Custom Setting options • Refer also to the Custom Setting Menu table at the end of this instruction manual. :. Automatic film rewind at the end of film roll (page 29) Options: G: Activated (initial setting) :: Disabled At initial setting, film rewind is automatically started when the end of the film roll is reached . However, the camera can be set not to rewind film at the end of the film roll but instead film rewind is started by pressing the two film rewind buttons e" for more than 1 sec. 2. Reset t o DX film speed setti ng for new film (page 36) Options: G: Activated (initial setting) :: Disabled At initial setting, film speed automatically sets to ID:! when a new film roll is loaded even after manually setting film speed to other than ID:!. However, the film speed setting can be changed to remain the same. 3. Bracketing order (page 62) Options: G: Metered value, under, over (initial setting) :: Under, metered value, over Bracketing is normally performed in the order of the initial setting (page 62). However, this Bracketing order can be changed to be performed from negative compensation to positive compensation. 'i . On-Demand Grid Lines superimposition display (page 5) Options: G: Not displayed (initial setting) :: Displayed At initial setting, On-Demand Grid Lines (page 5) are not displayed in the viewfinder. However, they can be set to be displayed. 71