Nikon N80QD Instruction Manual - Page 93
Push MODE button to select date/time display and fully, depress the shutter release button to take
UPC - 018208802173
View all Nikon N80QD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
• To set time to the precise second, push the SELECT button once at the step 8 so : indication blinks. When the actual time coincides with the time you have set, push the ADJUST button . The clock starts from 00 sec. (Seconds are not displayed in the LCD paneL) Example: To set the clock to 13:00:00: Set the clock to 13:00. Push the SELECT button so : indication blinks. When the time becomes exactly 13:00:00, push the ADJUST button to start the clock at exactly 13:00:00. • Batteries in the camera body also power the Quartz Date. Set the date and time after installing batteries for the first time. When changing batteries, date and time remain in the Quartz Date memory up to approx. 15 minutes without batteries. If the date and time data are lost, reset them . • Imprinting date/time Push MODE button to select date/time display and fully depress the shutter release button to take a picture with the imprinted date/time. ~ ( ~• SEOL•ECT AD•JUST 0) • The data displayed on the data imprint LCD will be imprinted on the picture. Select no imprint) to cancel data imprint. Compatible film speeds for data imprinting are IS032-3200. • Data imprint indicator - blinks for approx. two to three sec. immediately after the shutter is released (when a film is loaded). Imprinted date/time The illustration at right indicates the position of the imprinted date/time on the film. It may be difficult to read against bright colors such as white or reddish hues. 93