Nikon SB-910 AF Speedlight Users Manual - English - Page 112
Troubleshooting
View all Nikon SB-910 AF Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
H Tips on Speedlight Care and Reference Information This section explains troubleshooting, Speedlight care, specifications and optional accessories. Tips on Speedlight Care and Reference Information Troubleshooting If a warning indicator appears, use the following chart to determine the cause of the problem before taking the Speedlight to a retailer or Nikon representative for repair. Problems with the SB-910 Problem Cause Solution 0 The batteries are not The power cannot be correctly installed. turned on. Battery power is weak. Insert the batteries correctly. B-6 Replace the batteries. B-7 The flash-ready indicator does not light up. The standby function is activated. Battery power is weak. • Press the camera shutter- release button halfway. E-22 • Turn the SB-910 on. Replace the batteries. B-7 The SB-910 does not fire. The flash function is canceled Activate the flash function in in the custom settings the custom settings. B-18 The flash head is not set to Set the flash head to the the forward-facing position. forward-facing position. B-9 The effective flash output distance range does not appear. Aperture and ISO sensitivity information has not been received from the camera. • Check camera settings. • Detach and reattach the SB-910 to the camera. - The SB-910 cannot receive Turn the SB-910 and camera H focal length information from off, and then turn them on - the camera. again. The built-in wide panel is in use or the Nikon Diffusion Zoom head position is Dome is attached. not set automatically. • Remove the built-in wide panel or the Nikon Diffusion Dome. • Allow the zoom head position to be manually set in the custom settings. B-20 E-6 E-10 Power zoom function is canceled. Activate the power zoom function. E-19 H-1