Nikon SB-910 AF Speedlight Users Manual - English - Page 113
Warning indicators
View all Nikon SB-910 AF Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Tips on Speedlight Care and Reference Information Problem Remote flash unit does not fire. Cause Solution The distance between the master flash unit and the remote flash unit is too long, or there is an obstacle between them. The light from the master flash unit does not enter the remote flash unit light sensor window for wireless remote flash. Redo the setup of the master flash unit and remote flash units. The SB-910 does not work properly. Nonstandard display Microcomputer may have malfunctioned if this occurs even when fresh batteries are properly installed. • Replace the batteries while the SB-910 is on. • If the problem continues, contact your retailer or Nikon representative. Dials or buttons do not operate. The SB-910 does not operate. Key lock is activated. Thermal cut-out is active. Cancel key lock. Wait until the SB-910 cools down. 0 D-17 B-6 B-4 E-23 Warning indicators Warning indicator Cause Solution Low battery power indicator appears. All operations have stopped due to low battery power. Replace the batteries. The flash function is Thermal cut-out indicator appears. canceled, and all operations except power ON/OFF and custom settings have been suspended because the Allow the SB-910 to cool down. SB-910 has overheated and could become damaged. 0 B-7 H E-23 H-2