Nikon SB-910 AF Speedlight Users Manual - English - Page 78
Remote Flash Units
View all Nikon SB-910 AF Speedlight manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Wireless Multiple Flash-unit Photography Remote Flash Units Remote flash unit setting • The standby function of the SB-910, SB-900, SB-800, SB-700, SB-600, SB-500 and SB-R200 is canceled when remote mode is set. Make sure that there is sufficient battery power. • Set the zoom head position of the remote flash units wider than the angle of view, so that the subject will receive sufficient illumination even when the angle of the flash head is off axis from the subject. When the flash-to-subject distance is very short, set the zoom head position wide enough to achieve sufficient light. Setting up the remote flash units D • In most cases, position the remote flash units closer to the subject than the camera, so that light from the master flash unit can reach the light sensor window for wireless remote flash of the remote flash units. This is particularly important when holding a remote flash unit in the hand. D-17