Nokia 3220 User Guide - Page 25
Creating cut-out covers, Changing the cut-out cover, The Nokia PC Suite provides
View all Nokia 3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
■ Creating cut-out covers Use the plastic stencil to create a cut-out cover using your own design. Note: Use normal, plain paper as found in standard printers or use a photo print that is not thicker than 0.3 mm. To avoid affecting the antenna performance the material must not contain metal particles. 1. Place the stencil in the correct position and draw the outline. 2. Carefully cut out your new cut-out cover. Tip: The Nokia PC Suite provides within the image editor a tool to create cut-out covers. ■ Changing the cut-out cover 1. Remove the back cover from the phone. See Changing the covers on page 23. 2. Remove the cut-out cover from the back cover. 3. Place the new cut-out cover into the back cover by sliding the cut-out cover under the two guides at the bottom (1) and then under the guide at the top (2). 4. Replace the back cover. Copyright © 2005 Nokia. All rights reserved. 25