Nokia 6015i User Guide - Page 17

Change Xpress-on™ covers - charger 3 5mm

Page 17 highlights

6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 17 Tuesday, January 25, 2005 10:05 AM Set up your phone You can also plug a compatible headset into the 2.5mm headset jack on the side of your phone to allow hands-free operation. See Enhancements, 76. I Change Xpress-on™ covers Note: Before removing the cover, always switch off the power, and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached. Remove the back cover and battery For instructions to remove back cover and battery, see Change battery, 15. Remove the front cover Gently pull the bottom of the front cover away from the rest of the device, and remove the front cover. Install the keymat and front cover 1. Remove the keymat from the old front cover. 2. Place the keymat into the new front cover. 3. Press the front cover and keymat against the phone, and snap the front cover into place. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

Set up your phone
17
You can also plug a compatible headset into the 2.5mm headset jack on the
side of your phone to allow hands-free operation. See Enhancements, 76.
Change Xpress-on™ covers
Note:
Before removing the cover, always switch off the power, and
disconnect the charger and any other device. Avoid touching
electronic components while changing the covers. Always store
and use the device with the covers attached.
Remove the back cover and battery
For instructions to remove back cover and battery, see Change battery, 15.
Remove the front cover
Gently pull the bottom of the front cover
away from the rest of the device, and
remove the front cover.
Install the keymat and front cover
1.
Remove the keymat from the old
front cover.
2.
Place the keymat into the new
front cover.
3.
Press the front cover and keymat
against the phone, and snap the
front cover into place.
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm
Page 17
Tuesday, January 25, 2005
10:05 AM