Nokia IP2255 Installation Guide - Page 61
/100 Ethernet NIC Connectors and Cables, Eight-Port Ethernet NIC Front Panel Details
View all Nokia IP2255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Eight-Port 10/100 Ethernet NIC Figure 12 Eight-Port Ethernet NIC Front Panel Details Odd-numbered ports (1, 3, 5, 7) 10/100BaseT 1 3 5 2 4 6 Even-numbered ports (2, 4, 6, 8) 7 1357 L A L A 8 2468 Link LEDs (green) 00106 Activity LEDs (yellow) After the power is turned on, the cables are connected, and the ADP subsystem is ready, the Ethernet link LEDs on both the appliance and on the remote equipment illuminate to indicate the connection. As data is transmitted, the activity LEDs on the appliance illuminate. The IP2255 appliances can accommodate up to four eight-port 10/100 Ethernet NICs. 10/100 Ethernet NIC Connectors and Cables The Ethernet connectors on the eight-port 10/100 Ethernet NIC are RJ-45 connectors. Use a straight-through cable to connect the NIC to a 10-Mbps or 100-Mbps hub or switch. Use a crossover cable to connect directly to a host. Use IEEE 802.3 10BASE-T, 100Base-TX Cat 5 shielded twisted-pair, full-duplex, or half-duplex cable. Nokia IP2255 Security Platform Installation Guide 61