Nokia IP530 Installation Guide - Page 8
References and Resources
![]() |
View all Nokia IP530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Install Coreboot on a Nokia IP530 HOWTO. 6 References and Resources The following URLs were incredibly useful in writing this HOWTO and generally getting ACPI up and running. www.coreboot.org Coreboot (formerly known as LinuxBIOS) is a Free Software project aimed at replacing the proprietary BIOS (firmware) you can find in most of today's computers. It performs just a little bit of hardware initialization and then executes a so-called payload. www.flashrom.org Flashrom is a utility for identifying, reading, writing, verifying and erasing flash chips. Flashrom is designed to flash BIOS/EFI/ Coreboot/firmware/option ROM images on main boards, network/graphics/storage controller cards, and various programmer devices. www.seabios.org SeaBIOS is an open source implementation of a 16bit X86 BIOS. SeaBIOS can run in an emulator or it can run natively on X86 hardware with the use of Coreboot. http://code.google.com/p/sgabios/ The Google Serial Graphics Adapter BIOS or SGABIOS provides a means for legacy x86 software to communicate with an attached serial console as if a video card were attached. SGABIOS is designed to be inserted into a BIOS as an option rom to provide over a serial port the display and input capabilities normally handled by a VGA adapter and a keyboard, and additionally provide hooks for logging displayed characters for later collection after an operating system boots. It is designed to handle all text mode output sent to the legacy video bios int 10h service routine. INT 10h is the most common method for displaying characters in 16-bit legacy x86 code. www.google.com All well to known..... And all sites that i found that gave me every little bit of information to get Coreboot working on the Nokia IP530. Page 8 of 9
![](/manual_guide/products/nokia-ip530-installation-guide-d7238aa/8.png)