Nokia N-Gage QD Extended User Guide - Page 41
Call settings
View all Nokia N-Gage QD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Settings Call settings Note: To change the settings for call diverting, go to Menu→ Tools→ Call divert. See 'Settings for call diverting', p. 20. Send my caller ID • This network service allows you to set your phone number to be displayed (Yes) or hidden (No) from the person to whom you are calling. Or, the value may be set by your network operator or service provider when you make a subscription (Set by network). Call waiting: (network service) • The network will notify you of a new incoming call while you have a call in progress. Select: Activate to request the network to activate call waiting, Cancel to request the network to deactivate call waiting, or Check status, to check if the function is active or not. Automatic redial • When this setting is activated, your game deck will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialling. Summary after call • Activate this setting if you want the game deck to briefly display the duration and cost of the last call. To show costs, the Call cost limit needs to be activated for your SIM card. See p. 22. Speed dialling • Select On and the numbers assigned to the speed dialling keys ( - ), can be dialled by pressing and holding the key. See also 'Assigning speed dialling keys', p. 56. Anykey answer • Select On, and you can answer an incoming call by briefly pressing any key, except , , and . Line in use (network service) • This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. Note: You will not be able to make calls if you select Line 2 and have not subscribed to this network service. To prevent line selection, select Line change→ Disable if supported by your SIM card. To change this setting, you need the PIN2 code. Tip: To switch between the phone lines, press and hold in standby mode. 41 Copyright © 2003 Nokia. All rights reserved.