Nokia N92 User Guide - Page 116
Primary DNS address, Phone IP address
View all Nokia N92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Tools Select Options > Advanced settings to change the following settings: Network type - Select the internet protocol type to use: IPv4 or IPv6. The other settings depend on the selected network type. Phone IP address (for IPv4 only) - Enter the IP address of your device. DNS address - In Primary DNS address, enter the IP address of the primary DNS server. In Secondary DNS addr., enter the IP address of the secondary DNS server. Contact your internet service provider to obtain these addresses. Proxy serv. address - Define the address for the proxy server. Proxy port number - Enter the proxy port number. Wireless LAN access points Follow the instructions from your service provider. WLAN netw. name - Select Enter manually or Search for netw.. If you select an existing network, WLAN netw. mode and WLAN security mode are determined by the settings of its access point device. WLAN netw. mode - Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a wireless LAN access point device is not needed. WLAN security mode - Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. WLAN security sett. - Enter the settings for the selected security mode: Security settings for WEP: Wep key in use - Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device. Authentication type - Select Open or Shared for the authentication type between your device and the wireless LAN access point device. WEP key settings - Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format). Security settings for 802.1x and WPA/WPA2: WPA mode - Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings: EAP plug-in settings (only for EAP) - Enter the settings as your service provider instructs. Copyright © 2007 Nokia. All rights reserved. 107