NordicTrack 1600 Treadmill English Manual - Page 23

23

HOW TO USE THE INFORMATION MODE

The console features an information mode that allows

you to view treadmill usage information, select a sys-

tem of measurement for the console, and turn on and

turn off the demo mode. The information mode also al-

lows you to adjust the settings of the television and to

save channels into the televisionʼs memory.

Follow the steps below to use the information mode.

1.

Press the Rate/Wt. decrease button while in-

serting the key into the console.

When the information mode is selected, the lower

part of the screen will show the total number of

miles or kilometers that the walking belt has moved

(Distance) and the total number of hours that the

treadmill has been used (Time).

In addition, the center of the display will show the

word “English” for English miles or “Metric” for

metric kilometers. Press the Speed increase button

to change the unit of measurement if desired.

IMPORTANT:

If the words “Demo On” appear in

the center of the display, the “demo” mode is se-

lected. This mode is intended to be used only

when a treadmill is displayed in a store. When the

demo mode is selected, the power cord can be

plugged in, the key can be removed from the con-

sole, and the displays on the console will automati-

cally light in a preset sequence. The buttons on the

console will not function.

If the words “Demo On”

appear on the screen when the information

mode is selected, press the Speed decrease

button so the words “Demo Off” appear.

While the information mode is selected, you can

select an equalizer setting to optimize the sound of

your personal music if desired. To select an equal-

izer setting, first press the Start/Stop button. Next,

press the Speed increase and decrease buttons to

choose among Default, Classic, Country, Techno,

or Rock. When you have selected a setting, re-

move the key from the console. Then, press the

Rate/Wt. decrease button while reinserting the key

into the console.

2.

Press the TV button and adjust the brightness,

contrast, color, sharpness, and/or hue of the

television.

When the TV button is pressed, the brightness

level indicator will appear on the television screen.

Press the Volume (VOL) buttons to adjust the

brightness setting if desired.

Next, press the Channel (CHAN) buttons until the

contrast, color, sharpness, or hue level indicator

appears. Adjust the settings, if desired, by pressing

the Volume buttons.

3.

Press the TV button again and add or delete

cable channels.

Note: Complete this step only if you are using ana-

log cable. After all valid cable channels available in

your area have been saved into the televisionʼs

memory (see step 5 on this page), you can manu-

ally add channels or delete unwanted channels.

To add or delete a cable channel, first press the

Channel buttons until the desired channel number

appears on the screen. Then, press the Volume in-

crease button to add the channel, or the Volume

decrease button to delete the channel. Continue

this process until you have added all desired chan-

nels and deleted all unwanted channels.

4.

Press the TV button again and select a cable

connection.

If you have connected a CATV cable, one of the

three Cable settings should be selected; try all

three Cable settings, if necessary, to find the opti-

mal setting. Press the Volume increase button to

select the Standard Cable setting, the Channel de-

crease button to select the Cable IRC setting, or

the Channel increase button to select the Cable

HRC setting.

5.

Press the TV button again and save cable

channels into the televisionʼs memory.

When the TV button is pressed, the television will

begin scanning all of the cable channels available

in your area. When no cable signal is detected on

a channel, the channel will be skipped. When a

cable signal is detected, the channel will be saved

into memory and the next channel will be selected.

This process will continue until the highest channel

is reached.

Do not remove the key while the

television is scanning channels.

Note: If you are

viewing channels through an external source such

as a cable box or a VCR, the television will save

only the channel used by the external source.

6.

When you are finished using the information

mode, remove the key from the console.

To exit the information mode at any time (except

while the television is scanning channels), remove

the key from the console.

NordicTrack 1600 Treadmill English Manual - Page 23

How To Use The Information Mode

Page 23 highlights