NordicTrack 1750 Treadmill English Manual - Page 6
Assembly, Warning - parts
View all NordicTrack 1750 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver wrench . and adjustable Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging parts, do not use power tools for assembly. 3/8" Jam Nut (7)-2 3/8" Star Washer (6)-10 #8 x 3/4" Tek Screw (24)-4 3/8" x 1 1/4" Patch Bolt (2)-6 3/8" x 1 3/4" Bolt (3)-1 3/8" x 2" Bolt (4)-1 3/8" x 3 3/4" Patch Bolt (5)-4 1. Make sure that the power cord is unplugged. 1 With the help of a second person, raise the front of the treadmill and insert the crossbar on the Base (103) into the cutout in the cardboard stand as shown. Have the second person hold the treadmill until assembly step 3 to prevent it from moving forward or backward. WARNING: Serious injury may occur if the treadmill moves for- ward or backward and falls off the card- board stand. A second person must hold the treadmill until assembly step 3 103 to prevent the treadmill from moving, tipping, or falling. 6 Cardboard Stand