NordicTrack 2950 Instruction Manual - Page 11
If You Do Not Connect
View all NordicTrack 2950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. W ith the help of a second person, hold the console assembly (F) near the Handrails (74). Connect the ground wire (L) from the console assembly (F) to the Console Ground Wire (152) on the Pulse Crossbar (80). See the inset drawing. Connect the Upright Wire (83) to the console wire (H). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the two fan wires (not shown) on the left side. 10 F 74 L 83 H 152 80 H 83 11. Attach the console assembly (F) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 11 F 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the wires. Note: The wires should be positioned between the Handrails and the plastic console assembly. Then, insert the wires (D) upward into the console assembly (F). 74 D 8 2 74 D 8 2 11