NordicTrack A2550 Pro Treadmill User Manual - Page 7
Housing 96. Press a Wheel Axle 97 through - treadmill
View all NordicTrack A2550 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. Locate the Upright Wire (85), which is bundled at the front of the Base (94). Remove the packaging from the Upright Wire. Insert the Upright Wire back into the end of the Base and pull it out the indicated hole. If necessary, use the tie to pull the Upright Wire out of the hole. Hold a Wheel (95) centered in the Wheel Housing (96). Press a Wheel Axle (97) through the Wheel. Press the Wheel Housing into the end of the Base (94) as shown. Attach the other Wheel (95) in the same way. 1 97 95 Tie 55 96 97 96 85 Hole 94 2. Attach four Base Feet (92) to the Base (94) in the locations shown with four #8 x 1" Tek Screws 2 85 (2). See the inset drawing. Cut the plastic tie near the Upright Wire (85). 92 2 92 2 92 2 94 92 2 Cut 85 7