NordicTrack Asr 700 Elliptical User Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8 Hex Nylon Locknut (77)-4 M10 x 22mm x 1.5mm Washer (63)-2 #8 x 1/2" Screw (79)-6 M4 x 16mm Screw (80)-4 #8 x 2" Screw (68)-4 M6 x 14mm Flat Head Screw (55)-1 M6 x 18mm Patch Screw (57)-6 M8 x 19mm Patch M10 x 15mm Patch Screw (65)-4 Screw (71)-2 M10 x 27mm Patch Screw (64)-4 M8 x 55mm Patch Screw (61)-4 Barrel Nut (56)-1 M10 x 120mm Patch Screw (58)-2 5