NordicTrack Asr 700 Elliptical User Manual - Page 9

right Link Arm 25

Get NordicTrack Asr 700 Elliptical PDF manuals and user guides View all NordicTrack Asr 700 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

7. Insert the axle of the Roller (27) through the 7 right Link Arm (25); make sure that the Roller is on the inner side of the Link Arm. Attach the Roller with an M10 x 15mm Patch Screw (71) and an M10 x 22mm x 1.5mm Washer (63). Tip: Use a wrench to hold the axle of the Roller firmly in place while you tighten the Patch Screw into the axle. Repeat this step to attach the other Roller (27) to the left Link Arm (25). 25 27 25 63 71 8. Orient a Pedal (26) as shown. Attach the Pedal to the bracket on the Left Pedal Leg (24) with two M8 x 55mm Patch Screws (61) and two M8 Hex Nylon Locknuts (77). Repeat this step to attach the other Pedal (26). 8 26 61 24 77 26 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
9
8.
Orient a Pedal (26) as shown. Attach the Pedal
to the bracket on the Left Pedal Leg (24) with
two M8 x 55mm Patch Screws (61) and two M8
Hex Nylon Locknuts (77).
Repeat this step to attach the other Pedal
(26).
8
25
25
71
63
27
7
7.
Insert the axle of the Roller (27) through the
right Link Arm (25);
make sure that the Roller
is on the inner side of the Link Arm.
Attach
the Roller with an M10 x 15mm Patch Screw
(71) and an M10 x 22mm x 1.5mm Washer (63).
Tip: Use a wrench to hold the axle of the
Roller firmly in place while you tighten the
Patch Screw into the axle.
Repeat this step to attach the other Roller
(27) to the left Link Arm (25).
24
77
61
26
26