NordicTrack C 800 Treadmill English Manual - Page 29

2. Select the optional screens. While the settings mode is selected, the matrix will display several optional screens. Press the decrease button next to the Home button to select each of the following screens:  UNITS-To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC.  DEMO-The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button.  CONTRAST LVL-Press the Incline increase and decrease buttons to adjust the contrast level of the display.  CHECK WIFI STATUS-Press the Enter button to check the status of your iFit module. The lower display will show the software version number, the network SSID, the network encryption type, the connection status, the wireless signal strength, the IP address of the module, the number of registered users and their names, the results of the DNS lookup, and the status of the iFit server.  SEND/RECEIVE DATA-To send and receive workouts, workout logs, and updates, press the Enter button. When the process is finished, the words TRANSFERS DONE will appear in the display. 3. Exit the settings mode. To exit the settings mode, press the Settings button. HOW TO ADJUST THE CUSHIONING SYSTEM Remove the key from the console and unplug the power cord. In order to adjust the cushions, you may need to place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL on page 30). If a module is connected, you may also select the following screen:  AUDIO COACH-To turn on or turn off the audio coach, press the Enter button. If an iFit module is connected, you may also select the following screens: For more firmness, turn a cushion to the position shown in drawing 1; for less firmness, turn the cushion to the position shown in drawing 2. Adjust the other cushions in the same way. Note: Make sure that the cushions on the left and right sides of the treadmill are set to the same firmness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking platform should be.  DEFAULT MENU-The default menu will appear when you insert the key into the console or when 1 you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. 2 More firm Less firm 29