NordicTrack C 900 I Treadmill English Manual - Page 16
If You Do Not Connect The Con
View all NordicTrack C 900 I Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
14. Set the Console (80) onto the Console Base (64). Make sure that none of the wires from 14 the Console are pinched. Attach the Console (80) to the Console Base 80 (64) with six #8 x 3/4" Screws (2). Wires 64 2 2 15. Connect the ground wires (E), the 8-pin wires (F), the 10-pin wires (G), and the four speaker wires (H). Note: The Upright Wire (81) has 8 pins, the pulse wire (D) has 10 pins, and the speaker wires (H) have 2 pins. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. After all of the wires are connected, pull the wires tight and tighten the five Cable Ties (99) around the wires. Make sure that no wires are resting on any posts other than those with Cable Ties. Cut off the ends of the Cable Ties. 15 99 81 F E G D 99 99 H Console Wire 81 16