NordicTrack C 990 Instruction Manual - Page 13
all four Screws, and then tighten them.
View all NordicTrack C 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Set the console assembly (J) on the brackets on the Handrails (86). Make sure not to pinch any wires. Attach the console assembly (J) with the four 5/16" x 3/4" Screws (4) that you removed in step 9 and four 5/16" Star Washers (11); do not fully tighten the Screws yet. Insert the excess Upright Wire (81) into the console assembly. Then, pull the two ties (L) tight against the Upright Wire, and cut off the ends of the ties. 13 86 L 81 11 4 J 86 11 4 14. Attach the Pulse Crossbar (93) to the console assembly (J) with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 14 J 4 1 4 93 1 15. Carefully slide the Upright Crossbar (12) between the Left and Right Uprights (89, 90). 15 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (4) that you removed in step 5 and four 5/16" Star Washers (11); start all four Screws, and then tighten them. 11 4 12 11 4 90 89 13