NordicTrack C 990 Instruction Manual - Page 15
This will push a, spacer Q out of the Storage Latch; discard, the spacer., Do not overtighten
View all NordicTrack C 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
18. Remove the 5/16" Nut (34) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). 18 Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) to the bracket on the Base (94) with the 5/16" x 1 3/4" Bolt (6) and the 5/16" Nut (34) as shown. Then, raise the Storage Latch (53) to a vertical position, and remove the tie (P). P 53 34 94 6 19. Remove the 5/16" Nut (34) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (41). Align the upper end of the Storage Latch (53) with the bracket on the Latch Crossbar (41), and insert the 5/16" x 2 1/4" Bolt (3) through the bracket and the Storage Latch. This will push a spacer (Q) out of the Storage Latch; discard the spacer. Next, tighten the 5/16" Nut (34) onto the 5/16" x 2 1/4" Bolt (3). Do not overtighten the Nut; the Storage Latch (53) must be able to pivot. Then, lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 29). 19 34 Q 41 3 56 53 15