NordicTrack C 990 Instruction Manual - Page 14
Have a second person hold the Frame until
View all NordicTrack C 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
16. Attach the Tray (31) to the Upright Crossbar (12) with four #8 x 3/4" Screws (2); start all four 16 Screws, and then tighten them. 31 12 2 2 17. Note: If the treadmill is assembled on a smooth surface, it may roll forward in this step. Remove the two 5/16" x 3/4" Screws (4) from the Latch Crossbar (41). Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 19 is completed. Orient the Latch Crossbar (41) as shown. Make sure that the "This side toward belt" sticker (N) is facing the treadmill. Attach the Latch Crossbar to the brackets (O) on the Frame (56) with the two 5/16" x 3/4" Screws (4) and two 5/16" Star Washers (11). 17 O 11 4 56 N 41 O 11 4 14
14
16.
Attach the Tray (31) to the Upright Crossbar
(12) with four #8 x 3/4" Screws (2);
start all four
Screws, and then tighten them.
16
2
12
2
31
17
17.
Note: If the treadmill is assembled on a
smooth surface, it may roll forward in this
step.
Remove the two 5/16" x 3/4" Screws (4) from the
Latch Crossbar (41).
Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 19 is completed.
Orient the Latch Crossbar (41) as shown.
Make
sure that the “This side toward belt” sticker
(N) is facing the treadmill.
Attach the Latch
Crossbar to the brackets (O) on the Frame (56)
with the two 5/16" x 3/4" Screws (4) and two
5/16" Star Washers (11).
56
41
N
O
O
4
4
11
11