NordicTrack C80i English Manual - Page 11

Upright Wire 81., start all four Screws,

Get NordicTrack C80i PDF manuals and user guides View all NordicTrack C80i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

8. Set the Console Base (64) face down on a soft surface to avoid scratching the Console Base. 48 Remove and discard the two indicated screws (E). Then, remove the Pulse Crossbar (93). 64 E 93 9. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do 9 not overtighten the #10 x 3/4" Screws (9). 9 87 3 Orient the Pulse Crossbar (93) as shown. Start 4 one #10 x 3/4" Screw (9) with one #10 Star Washer (3) into each end of the Pulse Crossbar and each of the Handrails (84, 85). Then, start 93 another #10 x 3/4" Screw and #10 Star Washer 84 into each end of the Pulse Crossbar; start all 93 four Screws, and then tighten them. 4 Insert the Console Frame (87) into the Handrails (84, 85). Attach the Console Frame with four 1/4" x 1" Screws (4); start all four Screws, and then tighten them. Be careful not to pinch the Upright Wire (81). 85 81 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
11
8.
Set the Console Base (64) face down on a soft
surface to avoid scratching the Console Base.
Remove and discard the two indicated screws
(E). Then, remove the Pulse Crossbar (93).
64
93
8
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Start
one #10 x 3/4" Screw (9) with one #10 Star
Washer (3) into each end of the Pulse Crossbar
and each of the Handrails (84, 85). Then, start
another #10 x 3/4" Screw and #10 Star Washer
into each end of the Pulse Crossbar;
start all
four Screws, and then tighten them.
Insert the Console Frame (87) into the Handrails
(84, 85). Attach the Console Frame with four
1/4" x 1" Screws (4);
start all four Screws, and
then tighten them. Be careful not to pinch the
Upright Wire (81).
4
9
9
9
3
3
93
81
85
87
84
E
4