NordicTrack C80i English Manual - Page 12
May Become Damaged When You Turn, If You Do Not Connect
View all NordicTrack C80i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Firmly tighten the two 5/16" x 1" Bolts (28) and the four 5/16" x 1" Flat Head Screws (18) 10 (only one side is shown). With the help of a second person, hold the con- F sole assembly (F) near the Right Handrail (85) and the Left Handrail (not shown). Connect the ground wire from the console assembly (F) to the Console Ground Wire (58). See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (G) from the Upright Wire. 81 28 18 G 58 85 81 11. Set the console assembly (F) on the Left and Right Handrails (84, 85). Make sure that no 11 F wires are pinched. Insert the excess Upright Wire (not shown) into the Right Handrail and the ground wires (not shown) into the console assembly. Attach the console assembly (F) to the Pulse 92 92 84 Crossbar (93) with six #8 x 3/4" Screws (2); start all six Screws, and then tighten them. 25 Attach the two Console Clamps (92) to the console assembly (F) with four #8 x 1" Screws (25). 85 2 93 2 2 2 12