NordicTrack E 7.1 Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s) and grease packet(s), assembly requires a Phillips screwdriver and a rubber mallet . Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly. M6 Washer (112)-8 M8 Split Washer (103)-14 M8 Washer (95)-6 Wave Washer (118)-2 M4 x 19mm Screw (156)-8 M6 x 12mm Patch Screw (111)-4 M6 x 50mm Patch Screw (62)-4 M8 x 16mm Patch Screw (102)-16 M8 x 25mm Patch Screw (121)-2 M8 x 35mm Patch Screw (149)-2 M10 x 95mm Patch Screw (100)-4 5