NordicTrack E5vi Elliptical User Manual - Page 18

HOW TO USE A PRESET WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. See step 1 on page 16. 2. Select a preset workout. To select a preset workout, press the Workouts button repeatedly until the name of the desired workout appears in the display. The workout duration and a profile of the resistance levels for the workout will also appear in the display. Profile At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level is programmed for the next segment, the resistance level will appear in the display for a few seconds to alert you. The resistance of the pedals will then change. If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Digital Resistance buttons. IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. The workout will continue in this way until the last segment ends. To stop the workout at any time, stop pedaling. A tone will sound and the time will stop counting. To restart the workout, simply resume pedaling. 3. Begin pedaling to start the workout. 4. Follow your progress with the display. Each workout is divided into 20 or 30 one-minute segments. One resistance level is programmed for each segment. Note: The same resistance level may be programmed for consecutive segments. The resistance level for the first segment will appear in the display for a few seconds. During the workout, the workout profile will show your progress (see the drawing above). The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the resistance level for the current segment. See step 4 on page 16. 5. Measure your heart rate if desired. See step 5 on page 17. 6. Turn on the fan if desired. See step 6 on page 17. 7. When you are finished exercising, the console will turn off automatically. See step 7 on page 17. 18