NordicTrack Gx 4.4 Instruction Manual - Page 9
Attach the Front and Rear Pivot Covers 12, 15
View all NordicTrack Gx 4.4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. While a second person holds the Console (13) near the Pivot Bracket (71), connect the wires on the Console to the Upper Wire (87) and the Pulse Wires (61). Insert the excess wire downward through the Pivot Bracket (71). Do not insert the excess wire into the Console (13); the wires may interfere with the fan. Tip: Avoid pinching the wires. Attach the Console (13) to the Pivot Bracket (71) with four M4 x 16mm Screws (72); start all the Screws, and then tighten them. Tip: It may be helpful to adjust the angle of the Pivot Bracket by turning the Console Knob (77). 7 13 87 61 Avoid pinching the wires 72 77 72 71 72 8. Tip: Avoid pinching the wires. Press the Front Pivot Cover (12) and the Rear Pivot Cover (15) 8 together around the Pivot Bracket (71). Attach the Front and Rear Pivot Covers (12, 15) to the Pivot Bracket (71) with two M4 x 22mm Screws (84). 12 84 15 71 71 Avoid pinching the wires 9