NordicTrack Incline Trainer X9i Treadmill English Manual - Page 10

2. Make sure that the power cord is unplugged. 2 Identify the right Upright (77), which has a wire tie in it. Hold the Upright near the right side of the incline trainer. See the inset drawing. Tie the wire tie in the right Upright (77) around the end of the Upright Wire (78). Then, pull the other end of the wire tie until the Upright Wire is routed out of the top of the Upright. Wire Tie 77 Wire Tie 78 77 3. Attach the Upright (77) to the Base (80) with 3 two 3/8" x 5 1/2" Screws (5) and a 3/8" x 2 3/4" Screw (17) with three 3/8" Star Washers (8) as shown. Start all three Screws, and then tighten them. Be careful not to pinch the 77 Upright Wire (not shown) in the Upright. Attach the other Upright (not shown) as described above. Note: There is not a wire on the left side. 78 5 8 8 80 17 10