NordicTrack R 7200 Treadmill English Manual - Page 6
Assembly
View all NordicTrack R 7200 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included allen wrench and your own phillips screwdriver , standard screwdriver , and wire cutters . For help identifying the assembly hard- ware, see the hardware drawings below. Star Washer (67)-12 Cover Screw (90)-2 1" Tek Screw (82) Short Console Bolt (112)-2 Base Plate Bolt (125)-3 Handrail Bolt (66)-4 Console Bolt (72)-2 Pulse Bar Bolt (13)-4 1. With the help of a second person, tip the Uprights (20) down to the position shown. Next, slide the treadmill out of the box. Attach the four Base Pads (81) and two Plastic Spacers (37) to the bottom of the Uprights (20) with the four 1" Tek Screws (82) in the locations shown. Thread the two Leveling Feet (130) into the bottom of the Uprights (20). Insert the three Cage Nuts (128) into the three indicated holes in the treadmill. To insert each Cage Nut, first hook one side of the Cage Nut into a hole. Then use a standard screwdriver to press the other side of the Cage Nut into the hole, as shown 1 82 37 82 81 130 128 81 82 130 37 20 128 6