NordicTrack Sl710 English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench . Use the drawings below to identify the small parts used during assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 25. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. M8 Split Washer (55)-12 M6 Washer (60)-5 M10 Split Washer (88)-2 M8 Nylon Locknut (89)-4 M10 Nylon Locknut (63)-2 M4 x 16mm Screw (57)-5 M6 x 20mm Button Screw (20)-6 M6 x 38mm Button Screw (80)-1 M8 x 25mm Button Screw (79)-4 M8 x 40mm Button Screw (54)-8 M8 x 40mm Button Bolt (81)-4 M10 x 52mm Button Bolt (82)-2 M10 x 118mm Button Screw (78)-2 1. Identify the Front Stabilizer (15). While another person lifts the front of the Frame (1), attach the Front 1 Stabilizer to the Frame with four M8 x 40mm Button Screws (54) and four M8 Split Washers (55). 1 15 55 55 54 54 5