NordicTrack Smart Terrain 12.0 Elliptical English Manual - Page 11

12. Orient the Left Pedal Arm (44) as shown. 12 Apply grease to the axle on the Left Pedal Arm (44). Attach the Left Pedal Arm (44) to the Left Roller Arm (12) with an M8 x 16mm Screw (120), a Roller Arm Cover (81), and an M8 x 25mm Washer (98). Repeat this step for the Right Pedal Arm (not shown). 44 Grease 12 120 98 81 13. Apply grease to a Pedal Arm Axle (36) and to a 13 Wave Washer (95). Orient an Upper Body Leg (46) as shown. Note: For clarity, the Right Upper Body Arm (61) is not shown in this step. Insert the Pedal Arm Axle (36) through the Right Pedal Arm (58), the Wave Washer (95), and the Upper Body Leg (46). Next, insert a hex key into the M8 x 16mm Screw (120) in the Pedal Arm Axle (36). Using a second hex key, tighten another M8 x 16mm Screw (120), an Axle Cover (53), and an M8 x 25mm Washer (98) into the other end of the Pedal Arm Axle (36). Repeat this step on the other side of the elliptical. 120 53 98 46 95 Grease 36 58 120 11